|
|
|
|
- Cable
for connecting a monitor to a graphic card (VGA).
- 9
or 15 wires and in addtion one shield wire which
is connected with the shield foil of the cable and
both plugs.
- Connector
hood molded with PVC, in this way optimum strain
relief, no cable breakage possible.
| CM-4021-06 |
DB9M
TO HD15M 6FT MOLDED |
| CM-4034-06 |
DB9F
TO HD15M 6FT MOLDED |
| CM-4041-06 |
DB15M
TO HD15M 6FT MOLDED |
| CM-4051-06 |
HD15M
TO HD15M 6FT MOLDED |
| CM-4052-06 |
HD15M
TO HD15F 6FT MOLDED |
|
|
|
- Double
shielded cable (braid & al-mylar foil) consisting
of: 3 coax line for the RGB signals and 4C 28AWG
wires for the two sync, Signals and earth.
- Connector
hood with PVC molded, high quality cables for connection
of a monitor to a graphics card or VGA splitter.
- Suitable
for covering long distances (10-20M, depending on
graphics card and resolution), with high resolution;
with amplifier up to 100M.
| CM-4061-06 |
HD15M
TO HD15M 6FT MOLDED |
| CM-4061-10 |
HD15M
TO HD15M 10FT MOLDED |
| CM-4062-06 |
HD15M
TO HD15F 6FT MOLDED |
| CM-4062-10 |
HD15M
TO HD15F 10FT MOLDED |
|
|
|
- All
wires are shielded to avoid electromagnetic interference.
- UL-2919
ciaxial cable, double shielded, high impedance.
| CM-4071-06 |
DB9M
TO BNCx4 6FT MOLDED |
| CA-4071-06 |
DB9M
TO BNCx4 6FT |
| CM-4081-06 |
DB15M
TO BNCx3 6FT MOLDED |
| CA-4081-06 |
DB15M
TO BNCx3 6FT |
| CM-4091-06 |
DB15M
TO BNCx4 6FT MOLDED |
| CA-4091-06 |
DB15M
TO BNCx4 6FT |
| CM-4101-06 |
HB15M
TO BNCx3 6FT MOLDED |
| CA-4101-06 |
HB15M
TO BNCx3 6FT |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
|
